Skip to content
Navigation Menu
Menu
  • Home
    • About me
  • Stoves
    • blower stoves
      • A backpacking wood stove with a blower-An overview
      • Ultralight Blower Stove, the story of the Development.
      • Experiments with tent stoves with a top and side fuel ports
      • Miniature Dome Stove- A three-in-one-stove.
      • Blower stoves gallery- index
      • Blower Fans For Ultralight Blower Stove
      • Power Supply
      • Blower stove pulsing to extend battery life
      • Backup alcohol burner for ultralight blower stove
      • Spill free alcohol fuel bottle
      • Sturdy double pot stove
      • Hybrid blower stove
      • Large Double Pot ultralight blower stove that can simultaneously heat two pots.
      • Ultralight blower stove- Large/single pot stove in a cooking pot
      • Backpacking pots, pans, lids & lifters
      • Blower stove instructions- parts, assembly, starting and running
      • Backpacking hot bath- a dream of luxury turning to reality?
    • Tent Stoves
      • Glossary of my dome stove/blower stove component names, combustion processes
      • Tent stove- a tiny backpacking stove
      • Part 2.- A sacrificial guard tube for a KISS tent stove
      • Part 1.- DIY roll up stove pipe improvements
      • Part 2- New stove pipe forming
      • Part 3- A telescopic stove pipe roll up
      • Part 5.- Optimized holding rings for the KISS Stove
      • Part 5- Roll up flue pipe hand curving
      • Part 6.- Flue pipe seam width
      • Part 7- An alcohol flame lance to burn in roll up stove pipes
      • Part 8- A gas flame lance to burn in roll up flue pipes
      • Part 9- Large roll up stove pipe forming
      • Part 10- A telescopic stove pipe or roll up flue pipe
      • Part 11- A charcoal-fired lance to burn in a roll up stove pipe
      • Part 12- Correcting roll up flue pipe seams overlaps
      • Ultralight backpacking woodshed for stashing dry fuel
      • Ultralight tent stove overview
      • Gallery index for Miniature Dome Stove- a Three-in-one stove and the Hybrid Miniature Dome Stove
      • Micro tent stove design
      • A convertible tent stove that can do outdoor cooking
      • A flame-resistant oil vaporizer for a tiny wood-fired tent stove
      • Simple dome stove
      • Experiments with tent stoves with a top and side fuel ports
      • Miniature Dome Stove- A three-in-one-stove.
      • Miniature Dome Stove automatic fuel stick lifter
      • Adapting a Miniature Dome Stove to a tarp tent
      • Micro spot welding for ultralight gear
      • Miniature Dome Stove fittings
      • Reverse Burning and charcoal choking in ultralight miniature tent stoves with inverted J-burners
      • Improved fuel port for a Miniature Dome Stove
      • Downdraft tent stove- the pudding bowl stove
      • Experimental coffee tin barrel-stove.
      • Ultralight Tent Stove- Part 1
      • Ultralight Tent Stove- Part 2
      • Ultralight Tent Stove- Part 3
      • Ultralight Tent Stove- Part 4
      • Larger slim oval ultralight tent stove
      • Experimental ceramic stick burner
      • Rollup flue pipe for tent stoves and hot tenting
      • Tent stove compression ring
      • Easy fit conical connectors for tent stoves
      • Metal stove jack
      • Silnylon glueing
  • Food
    • Other food ideas gallery index
    • Cheap kitchen tricks- gallery index
    • DIY backpacking meals- “safe time-proven recipes”
    • Wanderers Seafood
  • Tents
    • Ultralight Tents
    • Tent Pegs
    • Ultralight snow anchors
    • Metal stove jack
    • Silnylon glueing
    • Lay flat seam for pyramid tents
  • DIY Gear
    • Alpine Candle
    • Antifungal Cream
    • Cement accelerant
    • Cocoons Camera
    • Fire Starters
    • Glide Wax
    • Gopro Mount
    • Larger Ultralight Tent Stove
    • Lay flat handles
    • LAY FLAT KETTLE
    • Lay flat seam for pyramid tents
    • Odourless Socks and Boots
    • Releasing screw cap lids.
    • Silnylon glueing
    • Snow Anchors
    • Student Stove.
    • Metal stove jack
    • Ultralight Bow Saw
    • Ultralight pancake spatula
    • Ultralight Tent
  • Tools
    • Micro spot welding for ultralight gear
    • Hand tools
    • Rolling curves in titanium and stainless steel foils
  • Refractories
    • DIY Refratories
    • DIY refractory mixing using sodium silicate
    • DIY refractory paper clay- “for people who play with fire”
    • DIY refractory from soil paper and sodium silicate- “Dirt-cheap & born in fire to survive in fire”
    • Cement Accelerant
    • DIY Sodium silicate refractory firing- getting the preparation right
    • DIY rapid set cement
    • Experimental ceramic stick burner
  • clothing
    • Adventure Clothing
    • Odourless Socks and Boots
  • cameras
    • Cocoon Camera
    • Gopro Mount
  • Green stuff
    • Off-grid solar hot water
    • PERFORMANCE OF A LARGE DOMESTIC SOLAR POWER SYSTEM
    • DIY Solar kettle
    • From little acorns big trees grow
    • Plane Tree leaf mulch
  • Contact

Tim Tinker

Ultralight Backpacking Gear

Cotton imbedded in silicone rubber leaving glossy smooth surface.

DIY silicone seam sealer

2021-10-02
On: October 2, 2021

Better mixing of DIY silicone seam sealer is described to give it a longer pot-life.Read More →

Darren's FTR tent with stove pitched on deep snow. 44.2 tent and stove pitched on deep snow.

Load-bearing tent stove pipes

2021-09-28
On: September 28, 2021

Load-bearing backpacking tent stove pipes- a gathering of ideas and innovations. Read More →

Tent drying and fooling around with friends on the Viking.

Protected: Wet silnylon- is polyester a better alternative?

2021-08-28
On: August 28, 2021

There is no excerpt because this is a protected post.

Dinner on the fire in 3 nesting pots at Faithful's Hut.

Part 4.1- Six nesting pots for backpacking at 427g

2021-08-27
On: August 27, 2021

A kit of 6 large nesting pots formed from food containers that collectively weigh only 427gRead More →

The new polyester tent pitched in readiness for its first alpine flogging.

DIY breathing polyester tent for backpacking

Sticky
2021-08-15
On: August 15, 2021

The making of an experimental breathing polyester tent for lightweight backpacking.Read More →

The substitute split pin used to hold in place the repaired release button of the alpine tour 7tm Telemark binding.

7tm binding repairs

2021-08-07
On: August 7, 2021

7tm binding repairs to keep your bindings working in the fieldRead More →

Low profile spring clamps holding a pressure pad made from a folded rectangle of thick plastic sheet from an ice cream container. The rectangle has been folded in two and squeezed flat with pliers.

Glueing instead of pinning for sewing backpacking tents

2021-08-07
On: August 7, 2021

Glueing instead of pinning for sewing backpacking tentsRead More →

A pot lid/pan from a biscuit tin used as a lid and as a frying pan.

Part 6. Pot lid and frying pan

2021-07-20
On: July 20, 2021

Effective and strong lightweight pot lid and frying pan from opportunity shops.Read More →

Four ultralight backpacking pots on the scales.

Part 4- Four nesting backpacking pots for 300g

2021-07-17
On: July 17, 2021

A kit of four large nesting pots formed from food containers that collectively weigh only 300g.Read More →

Posts pagination

Previous 1 … 7 8 9 … 30 Next

Categories

Archives

Please subscribe to my newsletter for more tinkering

I don’t spam! Read my privacy policy for more info.

Please check your inbox or spam folder to confirm your subscription.

Recent Posts

  • A gungy thermos and teapot that have been easily made squeaky clean with a dilute caustic soda solution without any need for brushing.Stainless steel cleaning- thermos or teapot
    Stainless steel cleaning effortlessly inside a thermos and teapot without brushing. […]
  • The Berocca tube and lid. The lid has a 4mm diameter hole drilled in it and a Chux cloth poison wick has been threaded through the hole.DIY weed wand for spot poisoning farm weeds
    DIY weed wand or applicator is described for efficient spot-poisoning farm weeds. […]
  • A DIY fire torch with a large flame with extra newspaper protruding from the end of the fire tube.DIY fire torch
    A simple DIY fire torch as a controlled ignition source for farm burn-offs. […]
  • Deployed DIY braces for farm tracksuit pants.DIY braces for activewear
    Simple DIY braces for comfort while doing active outdoor stuff. […]
  • Sourdough doughnutsWholemeal doughnuts using sourdough- a healthy indulgence
    A simple recipe for wholemeal doughnuts using sourdough […]
  • A DIY food funnel made from 2-liter milk bottles. Two lids have been welded together using a hot knife and a hole has been cut through the top of both lids to make a screw connector between the funnel and the bottle.DIY food funnel using hot knife welding
    A DIY food funnel for filling milk bottles using welding with a hot knife cutter. drill. […]

Recent Posts

  • A gungy thermos and teapot that have been easily made squeaky clean with a dilute caustic soda solution without any need for brushing.Stainless steel cleaning- thermos or teapot
    Stainless steel cleaning effortlessly inside a thermos and teapot without brushing. [Read More]
  • The stump of a hawthorn bush that has been given a deathly dab of glyphosate and red dye from a weed wand.DIY weed wand for spot poisoning farm weeds
    DIY weed wand or applicator is described for efficient spot-poisoning farm weeds. [Read More]
  • A weed windrow that has been rapidly set ablaze with a DIY fire torch.DIY fire torch
    A simple DIY fire torch as a controlled ignition source for farm burn-offs. [Read More]

Pages

  • Contact
  • Privacy Policy
  • You have subscribed to the Tim Tinker newsletter

This website contains affiliate links. As such, I will earn from qualifying purchases at no extra cost to you. This helps me maintain this website, so thanks in anticipation for your support.

Privacy Policy Designed using Dollah Premium. Powered by WordPress.

Verified by MonsterInsights